**For a better version of the sf vignettes see** https://r-spatial.github.io/sf/articles/

This vignette describes the functions in `sf`

that can
help to plot knitr::opts_chunk\(set(fig.height
= 4.5) knitr::opts_chunk\)set(fig.width = 6) simple features. It
tries to be complete about the plot methods `sf`

provides,
and give examples and pointers to options to plot simple feature objects
with other packages (mapview, tmap, ggplot2).

`sf`

and `sfc`

objects`sfc`

Geometry list-columns (objects of class `sfc`

, obtained by
the `st_geometry`

method) only show the geometry:

```
library(sf)
demo(nc, ask = FALSE, echo = FALSE)
plot(st_geometry(nc))
```

which can be further annotated with colors, symbols, etc., as the usual base plots, e.g. points are added to a polygon plot by:

```
plot(st_geometry(nc), col = sf.colors(12, categorical = TRUE), border = 'grey',
axes = TRUE)
plot(st_geometry(st_centroid(nc)), pch = 3, col = 'red', add = TRUE)
```

```
## Warning in st_centroid.sf(nc): st_centroid assumes attributes are constant over
## geometries of x
```

and legends, titles and so on can be added afterwards.
`border=NA`

removes the polygon borders.

As can be seen, the axes plotted are sensitive to the CRS, and in
case of longitude/latitude coordinates, degree symbols and orientation
are added if `axes = TRUE`

.

`sf`

The default plot of an `sf`

object is a multi-plot of all
attributes, up to a reasonable maximum:

`plot(nc)`

```
## Warning: plotting the first 10 out of 14 attributes; use max.plot = 14 to plot
## all
```

with a warning when not all attributes can be reasonably plotted. One can increase the maximum number of maps to be plotted by

`plot(nc, max.plot = 14)`

The row/column layout is chosen such that the plotting area is
maximally filled. The default value for `max.plot`

can be
controlled, e.g. by setting the global option
`sf_max.plot`

:

```
options(sf_max.plot=1)
plot(nc)
```

In case a single attribute is selected, by default a color key is
given the side of the plot where it leaves as much as possible room for
the plotted map; for `nc`

this is below:

`plot(nc["AREA"])`

but this can be controlled, and set to a particular side (1=below, 2=left, 3=above and 4=right):

`plot(nc["AREA"], key.pos = 4)`

The size of a color key can be controlled, using either relative
units (a number between 0 and 1) or absolute units (like
`lcm(2)`

for 2 cm):

`plot(nc["AREA"], key.pos = 1, axes = TRUE, key.width = lcm(1.3), key.length = 1.0)`

Keys for factor variables are a bit different, as we typically don’t want to rotate text for them:

```
$f = cut(nc$AREA, 10)
ncplot(nc["f"], axes = TRUE, key.pos = 4, pal = sf.colors(10), key.width = lcm(4.5))
```

Color breaks (class intervals) can be controlled by plot arguments
`breaks`

and `nbreaks`

. `nbreaks`

specifies the number of breaks; `breaks`

is either a vector
with break values:

`plot(nc["AREA"], breaks = c(0,.05,.1,.15,.2,.25))`

or `breaks`

is used to indicate a breaks-finding method
that is passed as the `style`

argument to
`classInt::classIntervals`

. Its default value,
`pretty`

, results in rounded class breaks, and has as a side
effect that `nbreaks`

may be honoured only approximately.
Other methods include `"equal"`

to break the data range into
`"nbreaks"`

equal classes, `"quantile"`

to use
quantiles as class breaks, and `"jenks"`

, used in other
software.

`plot(nc["AREA"], breaks = "jenks")`

`sf`

project geographic coordinates?Package `sf`

plots projected maps in their native
projection, meaning that easting and northing are mapped linearly to the
x and y axis, keeping an aspect ratio of 1 (one unit east equals one
unit north). For geographic data, where coordinates constitute degrees
longitude and latitude, it chooses an equirectangular
projection (also called *equidistant circular*), where at the
center of the plot (or of the bounding box) one unit north equals one
unit east.

Proj.4 also lets you project data to this projection, and the plot of

`plot(st_geometry(nc), axes = TRUE)`

should, apart from the values along axes, be otherwise identical to

```
= mean(st_bbox(nc)[c(2,4)]) # latitude of true scale
lat_ts = st_transform(nc, paste0("+proj=eqc +lat_ts=", lat_ts))
eqc plot(st_geometry(eqc), axes = TRUE)
```

Graticules are grid lines along equal longitude (meridians) or
latitude (parallels) that, depending on the projection used, often plot
as curved lines on a map, giving it reference in terms of longitude and
latitude. The `sf`

function `st_graticule`

tries
to create a graticule grid for arbitrary maps. As there are infinitely
many projections, there are most likely many cases where it does not
succeed in doing this well, and examples of these are welcomed as sf issues.

The following plot shows a graticule geometry on itself,

```
library(maps)
= st_as_sf(map('usa', plot = FALSE, fill = TRUE))
usa = st_crs("+proj=laea +lat_0=30 +lon_0=-95") # Lambert equal area
laea <- st_transform(usa, laea)
usa = st_graticule(usa)
g plot(st_geometry(g), axes = TRUE)
```

where we see that the graticule does not reach the plot boundaries
(but is cut off at the bounding box of `usa`

), and that the
axes show projected coordinates.

When we compute the graticule within the plotting function, we know the plotting region and can compute it up to the plot margins, and add axes in graticule units:

`plot(usa, graticule = TRUE, key.pos = NULL, axes = TRUE)`

We can also pass a `crs`

object to `graticule`

to obtain a graticule in a datum different from the default (WGS84).
`st_graticule`

takes parameters, and we can pass an object
returned by it to the `graticule`

parameter of
`plot`

, to get finer control:

```
= st_graticule(usa, lon = seq(-130,-65,5))
g plot(usa, graticule = g, key.pos = NULL, axes = TRUE,
xlim = st_bbox(usa)[c(1,3)], ylim = st_bbox(usa)[c(2,4)],
xaxs = "i", yaxs = "i")
```

which still doesn’t look great – completely controlling the plotting region of base plots is not easy.

`st_as_grob`

Package `sf`

provides a number of methods for
`st_as_grob`

:

`methods(st_as_grob)`

```
## [1] st_as_grob.CIRCULARSTRING* st_as_grob.COMPOUNDCURVE*
## [3] st_as_grob.CURVEPOLYGON* st_as_grob.GEOMETRYCOLLECTION*
## [5] st_as_grob.LINESTRING* st_as_grob.MULTILINESTRING*
## [7] st_as_grob.MULTIPOINT* st_as_grob.MULTIPOLYGON*
## [9] st_as_grob.MULTISURFACE* st_as_grob.POINT*
## [11] st_as_grob.POLYGON* st_as_grob.sfc*
## [13] st_as_grob.sfc_CIRCULARSTRING* st_as_grob.sfc_LINESTRING*
## [15] st_as_grob.sfc_MULTILINESTRING* st_as_grob.sfc_MULTIPOINT*
## [17] st_as_grob.sfc_MULTIPOLYGON* st_as_grob.sfc_POINT*
## [19] st_as_grob.sfc_POLYGON*
## see '?methods' for accessing help and source code
```

which convert simple simple feature objects into `grob`

(“graphics objects”) objects; `grob`

s are the graphic
primitives of the `grid`

plotting package. These methods can
be used by plotting packages that build on `grid`

, such as
`ggplot2`

(which uses them in `geom_sf`

) and
`tmap`

. In addition, `st_viewport`

can be used to
set up a grid viewport from an `sf`

object, with an aspect
ratio similar to that of `base::plot.sf`

.

contains a geom specially for simple feature objects, with support
for graticule white lines in the background using
`sf::st_graticule`

. Support is currently good for polygons;
for lines or points, your mileage may vary.

```
library(ggplot2)
ggplot() + geom_sf(data = usa)
```

Polygons can be colored using `aes`

:

```
ggplot() +
geom_sf(data = nc, aes(fill = BIR74)) +
scale_y_continuous(breaks = 34:36)
```

and sets of maps can be plotted as facet plots after rearranging the
`sf`

object, e.g. by

```
library(dplyr)
library(tidyr)
<- nc %>% select(SID74, SID79, geom) %>% gather(VAR, SID, -geom)
nc2 ggplot() +
geom_sf(data = nc2, aes(fill = SID)) +
facet_wrap(~VAR, ncol = 1) +
scale_y_continuous(breaks = 34:36)
```

Package `mapview`

creates interactive maps in html pages,
using package `leaflet`

as a workhorse. Extensive examples
are found here.

An example is obtained by

```
library(mapview)
mapviewOptions(fgb = FALSE) # needed when creating web pages
mapview(nc["BIR74"], col.regions = sf.colors(10), fgb = FALSE)
```

gives a map which is interactive: you can zoom and pan, and query features by clicking on them.

Package `tmap`

is another package for plotting maps, with
emphasis on production-ready maps.

```
library(tmap)
qtm(nc)
```

`tmap`

also has interactive leaflet maps:

```
tmap_mode("view")
tm_shape(nc) + tm_fill("BIR74", palette = sf.colors(5))
```

Replotting the last map in non-interactive mode is as simple as:

```
ttm()
tmap_last()
```

A draft version of the book *Elegant and informative maps with
tmap* by Martijn Tennekes and Jakub Nowosad is found at https://r-tmap.github.io/